Table of Contents
Advertisement
• When removing or installing a component that is subject to ESD damage, always place it component-
side up on an antistatic surface, in an antistatic card rack, or in an antistatic bag (see
50). If you are returning a component, place it in an antistatic bag before packing it.
Figure 3: Placing a Component into an Antistatic Bag
CAUTION: ANSI/TIA/EIA-568 cables such as Category 5e and Category 6 can get
electrostatically charged. To dissipate this charge, always ground the cables to a suitable
and safe earth ground before connecting them to the system.
RELATED DOCUMENTATION
General Electrical Safety Guidelines and Warnings | 47
Multiple Power Supplies Disconnection Warning | 60
TN Power Warning | 61
Action to Take After an Electrical Accident | 61
Figure 3 on page
50
Advertisement
Table of Contents
