Table of Contents
Advertisement
To mount the appliance using this option:
1. Remove the two front-mount rails from either side of the chassis.
2. Insert one mid-mount bracket to the center on either side of the chassis.
3. Attach the chassis to the equipment rack and insert the other two mid-mount brackets on either side
of the system to secure the chassis to the backs of the post. See
Figure 15: Mid-Mount in Two-Post Equipment Rack
4. Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the
opposite side and that the appliance is level.
RELATED DOCUMENTATION
Rack-Mount Installation Overview | 69
Front-and-Rear-Mounting the JSA Appliance Flush to a Rack | 86
Front-and-Rear-Mounting the JSA Appliance Recessed in a Rack | 87
Figure 15 on page
93.
93
Advertisement
Table of Contents
