Table of Contents
Advertisement
Table 11: Grounding Cable and Grounding Lug Specifications for the JSA7500 Appliance
Grounding Requirement
Amperage of grounding cable
Grounding kit
CAUTION: Before you install the appliance, a licensed electrician must attach a
grounding cable and a grounding lug to the grounding points with the 10-32 x 1/4-in.
pan-head screws and 1 mm washers. A grounding cable with an incorrectly attached lug
or screws can damage the appliance (for example, by causing a short circuit).
To ground the JSA7500 appliance:
1. Connect the grounding cable to a proper earth ground.
2. Verify that a licensed electrician has attached the grounding lug to the grounding cable.
Specification
Up to 50 A
Two 10-32 x 1/4-in. pan-head screws with two 1 mm washers and
one grounding lug
The grounding kit is shipped with the JSA7500 appliance.
78
(Continued)
Advertisement
Table of Contents
