Table of Contents
Advertisement
Username: root
NOTE: The username is case sensitive.
5.
Press Enter. The End User License Agreement (EULA) appears.
6.
Read the information in the window. Press the Spacebar to advance each window until you have
reached the end of the document. Type YES to accept the agreement, then press Enter. The
Appliance ID selection window appears.
NOTE: Although your current position is not highlighted, use up or down arrow keys and
spacebar to select an option. Use left or right arrow keys to select Next.
7.
Select the appliance ID and then press Enter to select Next.
For more information on the appliance ID, see the KB article KB14832 at
KB14832.
8.
Select normal from the following types of setup:
normal —Default setup
•
recovery —HA recovery setup
•
9.
Select Next. The Tuning Template window appears.
10. Select Enterprise to tune your appliance.
11. Select Next. The Date and Time window appears.
12. Select the method you want to use to set the date and time:
Manual –Allows you to manually input the time and date. Use the Spacebar to select the option,
•
and then use Tab to select Next. Press Enter. Go to Step
Server –Allows you to specify your time server. Use the Spacebar to select the option, and then
•
use Tab to select Next. Press Enter. Go to Step
13. Enter the current date and time and then select Next. Press Enter. The Time Zone Continent
window appears.
14. Select your time zone region, and select Next. The options appearing in this window are regions
associated with the continent or area previously selected.
15. Select one of the following Internet protocols:
IPv6 —Internet Protocol version 6
•
IPv4 —Internet Protocol version 4
•
16. Select Next. The Management Interface window appears.
17. Select the interface you want to specify as the management interface and select Next.
https:/ /kb.juniper.net/
"13" on page
100.
"14" on page
100.
100
Advertisement
Table of Contents
