Table of Contents
Advertisement
Table 7: Rack Requirements for the JSA Appliance
Rack Requirement
Specifications
Spacing of
• The holes within each rack set are spaced at 2-U [3.5-in. (4.5 cm)]. The device
mounting bracket
and flange holes
• The mounting brackets and front-mount flanges used to attach the chassis to
• The mounting holes in the mounting brackets provided with the device are
Connecting to the
Always secure the rack in which you are installing the JSA to the structure of the
building structure
building. If your geographical area is subject to earthquakes, bolt the rack to the
floor. For maximum stability, also secure the rack to ceiling brackets.
RELATED DOCUMENTATION
Additional Hardware Requirements | 15
Hardware Specifications | 6
General Site Installation Guidelines for the JSA Appliance | 16
Grounding the JSA7500 Appliance | 77
can be mounted in any rack that provides holes or hole patterns spaced at 2-
U [3.5-in. (4.5 cm)] increments. The holes within each rack set are spaced at
2-U [3.5-in. (4.5 cm)]. The device can be mounted in any rack that provides
holes or hole patterns spaced at 1-U [1.75-in. (4.5 cm)] increments.
a rack are designed to fasten to holes spaced at rack distances of 2-U (3.5-
in.).
spaced 1.25-in. (3.2 cm) apart (top and bottom mounting hole).
(Continued)
18
Advertisement
Table of Contents
