CHAPTER 14
Configuring Basic Settings
IN THIS CHAPTER
Identifying Network Settings | 96
Identifying Security Monitoring Devices and Flow Data Sources | 97
Identifying Network Assets | 97
Identifying Network Settings
Before you install Juniper Secure Analytics (JSA), you must have the following information for each
system you want to install:
NOTE: When you configure the network setting such as hostname and IP address using the
qchange_netsetup script, the JSA appliance hangs while rebooting. This issue is seen in
2013.2.r3.607582 and it will be fixed in the future releases. You need to manually power cycle
the JSA appliance to overcome this issue.
• Hostname
• IP address
• Network mask address
• Subnet mask
• Default gateway
• Primary DNS server
• Secondary DNS server (optional)
• Public IP address for networks using Network Address Translation (NAT)
• E-mail server
96