Dc Power Wiring Sequence Warning - Juniper JSA7500 Secure Analytics Hardware Manual

Hide thumbs Also See for JSA7500:
Table of Contents

Advertisement

RELATED DOCUMENTATION
General Electrical Safety Guidelines and Warnings | 47
Prevention of Electrostatic Discharge Damage | 49
AC Power Electrical Safety Guidelines | 51
AC Power Disconnection Warning | 52
DC Power Electrical Safety Guidelines | 53
DC Power Disconnection Warning | 54

DC Power Wiring Sequence Warning

WARNING: Wire the DC power supply using the appropriate lugs. When connecting
power, the proper wiring sequence is ground to ground, +RTN to +RTN, then –40 V to –
60 V. When disconnecting power, the proper wiring sequence is –40 V to –60 V, +RTN
to +RTN, then ground to ground. Note that the ground wire must always be connected
first and disconnected last.
Waarschuwing De juiste bedradingsvolgorde verbonden is aarde naar aarde, +RTN naar
+RTN, en –40 V naar – 60 V. De juiste bedradingsvolgorde losgemaakt is en –40 naar –
60 V, +RTN naar +RTN, aarde naar aarde.
Varoitus Oikea yhdistettava kytkentajarjestys on maajohto maajohtoon, +RTN varten
+RTN, –40 V varten –60 V. Oikea irrotettava kytkentajarjestys on –40 V varten –60 V,
+RTN varten +RTN, maajohto maajohtoon.
Attention Câblez l'approvisionnement d'alimentation CC En utilisant les crochets
appropriés à l'extrémité de câblage. En reliant la puissance, l'ordre approprié de câblage
est rectifié pour rectifier, +RTN à +RTN, puis –40 V à –60 V. En débranchant la
puissance, l'ordre approprié de câblage est –40 V à –60 V, +RTN à +RTN, a alors rectifié
pour rectifier. Notez que le fil de masse devrait toujours être relié d'abord et débranché
pour la dernière fois. Notez que le fil de masse devrait toujours être relié d'abord et
débranché pour la dernière fois.
Warnung Die Stromzufuhr ist nur mit geeigneten Ringösen an das DC Netzteil
anzuschliessen. Die richtige Anschlusssequenz ist: Erdanschluss zu Erdanschluss, +RTN
zu +RTN und dann -40 V zu -60V. Die richtige Sequenz zum Abtrennen der
Stromversorgung ist -40 V zu -60 V, +RTN zu +RTN und dann Erdanschluss zu
Erdanschluss. Es ist zu beachten dass der Erdanschluss immer zuerst angeschlossen und
als letztes abgetrennt wird.
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jsa3800Jsa5800Jsa7800

Table of Contents