Juniper JSA7500 Secure Analytics Hardware Manual page 86

3. Place the grounding cable lug over the grounding points on the side of the chassis as shown in
4 on page 79.
Figure 4: Grounding the JSA7500 Appliance
10-32 x 1/4-in. Pan-head screws
1
—
1 mm washer
2
—
4. Secure the grounding cable lug to the grounding points with the screws and washers as shown in
Figure 4 on page 79.
5. Dress the grounding cable, and verify that it does not touch or block access to the JSA7500
components and that it does not cause a tripping hazard.
RELATED DOCUMENTATION
Connecting JSA7500 to a DC Power Source | 80
Installing the JSA Hardware | 83
Grounding lug
3
—
Grounding points
4
—
79
Figure