Acx5048 And Acx5096 Power System; Ac Power Supply For An Acx5000 Router - Juniper ACX5048 Hardware Manual

Installing a Fan Module in an ACX5000 Router | 134
Removing a Fan Module from an ACX5000 Router | 133

ACX5048 and ACX5096 Power System

IN THIS SECTION

AC Power Supply for an ACX5000 Router | 65

AC Power Supply LEDs on an ACX5000 Router | 67
DC Power Supply for an ACX5000 Router | 69
DC Power Supply LEDs on an ACX5000 Router | 72
AC Power Specifications for an ACX5000 Router | 73
AC Power Cord Specifications for an ACX5000 Router | 74
DC Power Specifications for an ACX5000 Router | 75
AC Power Supply for an ACX5000 Router
The two power supplies in ACX5000 routers are hot-removable and hot-insertable field-replaceable units
(FRUs). The power supplies are installed in the router at the factory. You can install replacement power
supplies from the management panel without powering off the router or disrupting the router function.
The AC power supply in 1 U ACX5048 is 650 W; the AC power supply in the 2 U ACX5096, is 850 W.
Both power supplies look identical. Be sure to use the correct power supply for your chassis product SKU
(see Table 16 on page 67).
CAUTION:
alarm when a power supply having a different wattage is inserted into the chassis.
See Figure 18 on page 66
the 2 U power supply.
Do not mix power supplies with different wattage. The system raises an
for an example of the 1 U design and Figure 19 on page 66 for an example of
65