Juniper ACX5048 Hardware Manual page 49

Figure 8: Management Panel Components on ACX5096
1 Status LEDs
—
2 em1–SFP management Ethernet port (C1)
—
Cage (socket for either 1 GbE copper SFP or fiber
SFP)
3 em0–RJ-45 (1000 Base-T) management Ethernet
—
port (C0)
The management panel consists of the following components:
Status LEDs
ALM–Alarm
Unlit indicates the router is halted or that there is no alarm.
Red indicates a hardware fault, such as a power failure or a system shutdown due to system
over-heating.
Amber indicates a major or minor alarm.
SYS–System
Unlit indicates the router is powered off or halted.
Solid green indicates that Junos OS for ACX Series is loaded on the router.
ID–Identification or beacon
Unlit indicates the beacon feature is not enabled.
4 RJ-45 console port (C0N) )
—
5 USB port
—
49