Router Ports - Juniper ACX5048 Hardware Manual

Figure 10: ACX5096 Router Port Panel
1 Electrostatic Discharge (ESD) terminal
—
2 10 Gigabit Ethernet ports (96)
—
This topic describes:

Router Ports

The ACX5096 ports, (0 through 95) support:
1 Gbps SFP transceivers
10 Gbps SFP+ transceivers
10 Gbps direct attach copper (DAC) cables
Ports 96 through 104 support:
40 Gbps QSFP+ transceivers
Additionally ports 96 and 100 support:
QSFP+ direct attach copper (DAC) cables
QSFP+ to SFP+ direct attach copper break out (DACBO) cables
QSFP+ to SFP+ fiber break out cables
All 96 of these ports can be used for SFP+ transceivers or SFP+ direct attach copper (DAC) cables. You
can use 1-Gigabit Ethernet SFP+, 10-Gigabit Ethernet SFP+ transceivers and SFP+ direct attach copper
cables in any access port.
CAUTION:
another copper transceiver. Internal damage to the access ports and router can occur.
We recommend either using the top port row exclusively, or bottom port row
exclusively, for copper transceivers.
Do not place a copper transceiver in an access port directly above or below
3 40 Gigabit Ethernet ports (8)
—
52