CS19208 / CS19216 User Manual
EDID Mode see VS482B
The EDID Mode command allows you to set EDID mode for the CS19208 /
CS19216.
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
edid
Control
port1
port2
default
remix
Enter
Enter
EDID Mode Command
The available formula for the KVM Status command is as follows:
1. Command + Control + [Enter]
For example, to set the CS19208 / CS19216's EDID mode to ATEN default
EDID, type the following:
edid default [Enter]
74
Description
Set EDID Mode Command
Description
Set to display A (DisplayPort monitor) EDID
Set to display B (HDMI monitor) EDID
Set to ATEN default EDID
Set to remix mode
Description
Enter and send out command