Osd Hotkey; Osd Main Screen - ATEN CS19208 User Manual

CS19208 / CS19216 User Manual

OSD Hotkey

You can display the OSD on the console monitor while also viewing the
display of any port on the CS19208 / CS19216 by pressing the [Scroll Lock]
key twice.
Note: You can optionally change the OSD hotkey to the Ctrl key, in which
case you would press [Ctrl] twice (see OSD HOTKEY, page 35). With
this method, you must press the same [Ctrl] key.

OSD Main Screen

When you invoke the OSD, a screen similar to the one below appears:
Note:
 The diagram depicts the administrator's main screen. The user main screen
does not show the F4 and F6 functions, since these are reserved for the
administrator and can't be accessed by users.
 The OSD always starts in list view, with the highlight bar at the same
position it was in the last time it was closed.
 Only the ports that have been set accessible by the administrator for the
current logged in user are visible (see SET ACCESSIBLE PORTS,
page 38).
 Enable Mouse Emulation to operate the OSD using mouse. When the
Mouse Emulation is disabled, you can only operate the OSD using
keyboard.
a) To enable the Mouse Emulation via OSD, see Mouse Emulation,
page 40.
30