ATEN CS19208 User Manual page 49

Edit Port Names To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
administrator to create, modify, or delete port names.
To edit a port name:
1. Click the port, or use the navigation keys to move the highlight
2. Key in the new port name, or modify/delete the old one. The
3. When you have finished editing, press [Enter] to have the
Restore Default This function is used to undo all changes and return the setup to
Values the original factory default settings (See Factory Default Hotkeys
and Settings, page 95) except for the port name list, username and
password information, which are saved.
Clear The Name This function clears the port name list.
List
Activate Beeper Choices are Y (on), or N (off). When activated, the beeper sounds
whenever a port is changed; when activating the Auto Scan
function (see F7 SCAN, page 43); or an invalid entry is made on an
OSD menu. The default is Y.
Set Quick View This function lets the administrator select which ports to include as
Ports quick view ports.




The default has no ports selected for quick view.
bar to it.
maximum number of characters allowed for the port name is 12.
Legal characters include:

All alpha characters: A–Z

All numeric characters: 0–9

* ( ) + : - , ? . /
Case does not matter; the OSD displays the port name in all
capitals no matter how they were keyed in.
change take effect. To abort the change, press [Esc].
To select/deselect a port as a quick view port, use the navigation
keys to move the highlight bar to it, then press [Spacebar].
When a port has been selected as a quick view port, A check
√
( )
mark displays in the QV column of the LIST on the main
screen. When a port is deselected, the check mark
pears.
If one of the quick view options is chosen for the LIST view (see
F2 LIST, page 34), only a port that has been selected here
will display on the list.
If one of the quick view options is chosen for auto-scanning
(See Scan-Skip Mode, page 36), only a port that has been
selected here will be auto-scanned.
4. OSD Operation
√
( )
disap-
39