Table of Contents
Advertisement
Operation Mode
The EDID Mode, CEC, OSD and Output Status features can be configured
from the Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM6404H / VM6809H automatically apply a preset video
configuration or EDID Mode, which utilizes the best resolution across
different monitors
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
The OSD, when enabled for a port, lets an attached display/monitor
show real-time port switching information
The Output Status shows whether the video/audio of an Output port is
turned on or off and allows viewing and setting of the Output
Resolution
To configure the VM6404H / VM6809H's operation mode settings from the
Main Screen, use the Menu pushbutton to access the Menu page, press 8 or
Next to navigate to the next page, then press pushbutton 1 to access the
Operation Mode page.
1: Operation Mode
2: Security Mode
EDID Mode
To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:
1: EDID Mode
2: CEC
Chapter 3. Front Panel Configuration
:
Prev
:
Next
: Next
(Continues on next page.)
27
Advertisement
Table of Contents
