F7: Scan - ATEN CS19208 User Manual

F7: SCAN

Clicking
function allows you to automatically switch among the available computers at
regular intervals so that you can monitor their activity without having to take
the trouble of switching yourself. Enable mouse emulation for Auto Scan to
work (see page 40).
 The selection of computers to be included for auto-scanning is made with
the Scan–Skip mode setting under the F3: SET function (see page 36).
 The amount of time that each port displays for is set with the Scan
Duration setting under the F3: SET function (see page 36). When you
want to stop at a particular location, press the [Spacebar] to stop scanning.
 If the scanning stops on an empty port, or one where the computer is
attached but is powered Off, the monitor screen will be blank, and the
mouse and keyboard will have no effect. After the Scan Duration time is
up, the scan function will move on to the next port.
 As each computer is accessed, an S appears in front of the port ID display
to indicate that it is being accessed under Auto Scan mode. When the port
ID with the symbol displays, the background screen is blank.
 While Auto Scan mode is in effect, the console will not function normally.
You must exit Auto Scan mode in order to regain control of the console.
 While you are in Auto Scan mode, you can pause the scanning in order to
keep the focus on a particular computer either by pressing P, or with a left-
click of the mouse. See Invoking Auto Scan, page 48, for details.
 To exit Auto Scan mode, press the [Spacebar] or [Esc].
or pressing [F7] invokes Auto Scan mode. This
4. OSD Operation
43