EDID Mode
To configure an EDID mode for the CS19208 / CS19216, do the following:
1. Invoke HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [V].
3. Key in [1], [2], [3], or [4], the Function of [1], [2], [3], and [4] keys is
listed in the following table:
4. Press [Enter]. After pressing [Enter] you automatically exit HSM.
Mouse Emulation Control
The default setting is enabled. To disable, do the following:
1. Invoke HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [M].
This procedure is a toggle. Repeat to enable.
Note: Enable mouse emulation to perform any independent switching of a port
and for Auto Scan Mode or Skip Mode to work.
Key
Description
1
Sets the switch to read
DisplayPort monitor's EDID
(Default)
2
Sets the switch to read HDMI
monitor's EDID
3
Sets the switch to ATEN default
EDID mode
4
Sets the switch to remix mode
5. Hotkey Operation
53