Operation Mode; Edid Mode - ATEN VM3404H User Manual

VM3404H / VM3909H User Manual

Operation Mode

The EDID Mode, CEC, OSD and Output Status features can be configured
from the Operation Mode page.
EDID (Extended Display Identification Data) is used to have the
VM3404H / VM3909H automatically apply a preset video
configuration or EDID Mode, which utilizes the best resolution across
different monitors
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control
The OSD, when enabled for a port, lets an attached display/monitor
show real-time port switching information
The Output Status shows whether the video/audio of an Output port is
turned on or off
To configure the VM3404H / VM3909H's operation mode settings from the
Main Screen, use the Menu pushbutton to access the Menu page, press Next to
navigate to the next page, then press pushbutton 1 to access the Operation
Mode page.

1: Operation Mode

2: Security Mode

EDID Mode

To configure the EDID Mode, do the following:
1. From the Operation Mode page, press pushbutton 1:

1: EDID Mode

2: CEC
26
Prev
Next
Next
(Continues on next page.)