Preparation - ATEN CS19208 User Manual

CS19208 / CS19216 User Manual

Preparation

To prepare for the firmware upgrade, do the following:
1. Use the Firmware Upgrade Cable provided with this unit to connect a COM
port on your computer to the Firmware Upgrade Port of your switch.
2. Shut down all the computers on the KVM installation.
3. From your KVM switch console, login to the OSD as the administrator
(see p. 29) and select the F4 Admin function.
4. Scroll down to Firmware Upgrades. Press [Enter], then press [Y] to
invoke Firmware Upgrade mode (see p. 40).
Or
Invoke the Firmware Upgrade mode using RS-232 command (see p. 72).
78
Firmware Upgrade Cable