4. OSD Operation
F4: Admin
Clicking
or pressing [F4] activates Admin function. F4 is an
administrator only function. It allows the administrator to configure and
control the overall operation of the OSD. To change a setting, click on the
settings item you want to configure, or use the up and down arrow keys to move
the highlight bar to it then press [Enter].
After you select an item, a submenu with further choices appears. Click an
√
item, or move the highlight bar to it then press [Enter]. A check mark (
)
appears before the selected item so that you know which one it is. The settings
are explained in the following table:
37