Broadcast Mode - ATEN CS19208 User Manual

Broadcast Mode

The Broadcast Mode command allows you to set enable/disable broadcast
mode for the CS19208 / CS19216. The default setting is off.
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
broadcast
Control
on
off
Enter
Enter
Broadcast Mode Command
The available formula for the KVM Status command is as follows:
1. Command + Control + [Enter]
For example, to enable the CS19208 / CS19216's broadcast mode, type the
following:
broadcast on [Enter]
Description
Set Broadcast Mode Command
Description
Enable broadcast mode for CS19208 /
CS19216
Disable broadcast mode for CS19208 /
CS19216
Description
Enter and send out command
Chapter 7. RS-232 Operation
75