ATEN CS19208 User Manual page 18

CS19208 / CS19216 User Manual
No. Component
6 USB 3.1 Gen
1 Peripheral
Hub Section
7 Reset Button
8 Power LED
8
USB 3.1 peripherals (printers, scanners, etc.) can plug into this
port (this may require an extra power adapter).
Note: The USB 3.1 hub cannot be accessed through the
switch by computers on the second level of a cascaded
installation.
Pressing this switch performs a system reset. When the
system is reset, the switch beeps, and the port LEDs flash in
succession until the reset is complete. After the reset is
complete you can login again.
Note: This switch is recessed and must be pushed with a
small object, such as the end of a paper clip or a ballpoint pen.
Lights to indicate that the switch is powered up and ready to
operate.
Description