OSD Hotkey
The OSD Hotkey command allows you to change the hotkey used to invoke the
OSD. The default hotkey is [Scroll][Scroll].
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
osdkey
Control
scroll
ctrl
Enter
Enter
Hotkey Switching Commands
The available formulas for OSD Hotkey commands are as follows:
1. Command + Control + [Enter]
For example, to change the OSD hotkey invoke key to [Scroll] [Scroll], type
the following:
osdkey scroll [Enter]
2. Command + Control + [Enter]
For example, to change the OSD hotkey invoke key to [Ctrl] [Ctrl], type the
following:
osdkey ctrl [Enter]
Description
OSD Hotkey Command
Description
Change OSD hotkey invoke key to:
[Scroll] [Scroll] (Default)
Change OSD hotkey invoke key to:
[Ctrl] [Ctrl]
Description
Enter and send out command
Chapter 7. RS-232 Operation
69