Powering Off And Restarting - ATEN CS19208 User Manual

Powering Off and Restarting

If it becomes necessary to power off a CS19208 / CS19216, do the following
before restarting it:
1. Unplug the CS19208 / CS19216 from its power source.
2. Shut down all the computers that are attached to it.
Note: Unplug the power cords of any computers that have the Keyboard
Power On function. Otherwise, the CS19208 / CS19216 will still
receive power from the computers.
3. Wait 10 seconds, then plug the CS19208 / CS19216 back in.
4. Power on the computers.
Note: If there are stations cascaded down from the primary CS19208 /
CS19216, all the cascaded stations and the computers attached to
them must be shut down as well.
3. Basic Operation
27