F2: List - ATEN CS19208 User Manual

CS19208 / CS19216 User Manual

F2: List

Clicking
function lets you broaden or narrow the scope of which ports the OSD displays
on the main screen. The submenu choices and their meanings are given in the
table below.
Choice
ALL Lists all of the ports on the installation that have been set accessible
by the administrator for the current logged in user.
Quick View Lists only the ports that have been selected as quick view ports (see
SET QUICK VIEW PORTS, page 39).
Powered On Lists only the ports that have their attached computers powered on.
Quick View + Lists only the ports that have been selected as quick view ports (see
Powered On SET QUICK VIEW PORTS, page 39), and that have their attached
computers powered on.
Move the highlight bar to the choice you want, then press [Enter]. A check
√
mark ( ) appears before the choice to indicate that it is the currently selected
one.
34
or pressing [F2] activates the List function. This
Meaning