Hotkey Setting - ATEN CS19208 User Manual

CS19208 / CS19216 User Manual

Hotkey Setting

The Hotkey Setting command allows you to change the hotkey used to invoke
the HSM (Hotkey Setting Mode). The default hotkey is [Num Lock] + [-].
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
hotkey
Control
num
f12
Enter
Enter
Hotkey Setting Commands
The available formulas for Hotkey Setting commands are as follows:
1. Command + Control + [Enter]
For example, to change the HSM invoke key to [Num Lock] + [-], type the
following:
hotkey num [Enter]
2. Command + Control + [Enter]
For example, to change the HSM invoke key to [Ctrl] + [F12], type the
following:
hotkey f12 [Enter]
68
Description
Hotkey Setting Command
Description
Change the HSM invoke key to:
[Num Lock] + [-] (Default)
Change the HSM invoke key to:
[Ctrl] + [F12]
Description
Enter and send out command