Grouping Ports Into "Vertical" Channels; Channels Diagram - ATEN CS19208 User Manual

CS19208 / CS19216 User Manual

Grouping Ports into "Vertical" Channels

Once the cables have been connected and multi-display mode has been selected
in the OSD, the CS19208 / CS19216 auto-detects the channels and displaying
modes.Users can then assign them a channel number as the port name (the
channels are represented by the vertical columns in the diagram below). So, all
the Port 1s become Channel 1, all the Port 2s become Channel 2, ... , and all the
Port 7s become Channel 7. The ports will all be switched at the same time,
channel by channel.
Depending on the number of stages in your stack, a CS19208 / CS19216
installation offers dual display (two stages), triple display (three stages), quad
display (four stages) or multi-display (up to 8 stages) scenarios. For reference
purposes, the example shows a four-stage installation with quad display
functionality.
Note: Only one DisplayPort video signal can be displayed at a time,
depending on the configuration of the CS19208 / CS19216 unit on the
first switch.

Channels Diagram

24
Ch7 Ch6
First
Switch
Second
Switch
Third
Switch
Fourth
Switch
Ch1