Multi-Display Installation Diagram - ATEN CS19208 User Manual

5. Connect the cables for the first switch. See Single Stage Installation,
page 17 for full details. All video, audio and peripheral devices must be
connected to the first switch.
6. Power up the CS19208 / CS19216 units, starting with the first switch, and
then power on the computers.
Note: Make sure the computers and devices that the CS19208 / CS19216
connects to are also properly grounded.

Multi-display Installation Diagram

5
USB Type B to
Type A cable
3
5
5
1
2
Third / Fourth
Stage Units
4
2. Hardware Setup
Computers with
2/3/4 video inputs
DisplayPort cables
Second Switch
First Switch
23