ATEN CS19208 User Manual page 46

CS19208 / CS19216 User Manual
Port ID Display
Duration
Port ID Display
Mode
Scan Duration
Scan-Skip Mode
Screen Blanker
Hotkey
Command Mode
Hotkey
OSD Language
36
Determines how long a port ID displays on the monitor after a port
change has taken place. The choices are: 3 Seconds (default) and
Always Off.
Selects how the port ID is displayed: the port number plus the port
name (Port Number + Port Name) (default); the port number
alone (Port Number); or the port name alone (Port Name).
Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan mode (see F7 SCAN,
page 43). Key in a value from 1–255 seconds, then press [Enter].
Default is 5 seconds; a setting of 0 disables the SCAN function.
Note: We recommend to set the scan duration to 10 seconds.
Selects which computers will be accessed under skip mode
(see F5: SKP, page 41), and Auto Scan mode (see F7: SCAN,
page 43. Choices are:
ALL - All the ports which have been set accessible (see SET
ACCESSIBLE PORTS, page 38);
QUICK VIEW - Only those ports which have been set accessible
and have been selected as quick view ports (see SET QUICK
VIEW PORTS, page 39);
POWERED ON - Only those ports which have been set accessible
and are powered on;
QUICK VIEW + POWERED ON - Only those ports which have
been set accessible and have been selected as quick view ports
and are powered on. The default is ALL.
Note: The quick view choices only show up on the administrator's
screen, since only he has Quick View setting rights (see SET
QUICK VIEW PORTS, page 39).
If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30
minutes, then press [Enter]. The default setting of 0 disables this
function. The screen will be blanked in the amount of time set
(count from the moment when OSD is closed)
Enables / disables the hotkey command function in case a conflict
with programs running on the computers occurs.
Sets the keyboard shortcut for invoking Hotkey Mode (see Hotkey
Setting Mode, page 46). Choices are: [NUM LOCK] + [-] (minus)
(default), and [CTRL] + [F12].
Sets the language used in the OSD. Choices are: English (Default),
German, Japanese, Simplified Chinese, Traditional Chinese,
Spanish, French, and Russian.