Kvm Status - ATEN CS19208 User Manual

KVM Status

The KVM Status command allows you to display read-only information about
the CS19208 / CS19216' current configuration status. The default setting is off.
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
status
Control
on
Enter
Enter
KVM Status Command
The available formula for the KVM Status command is as follows:
1. Command + Control + [Enter]
For example, to display the CS19208 / CS19216's configuration status, type
the following:
status on [Enter]
A message similar to the one below will then appear:
hotkey: [numlock]+[-] / [scrolllock],[scrolllock]
os setting: pc
keyboard emulation: enabled/disabled
keyboard layout: English
mouse emulation: enabled/disabled
monitor re-detection: enabled/disabled
Description
KVM Status Command
Description
Enable KVM status
Description
Enter and send out command
Chapter 7. RS-232 Operation
73