Set Phone Notifications On; Do Not Disturb; View Notifications; Music Controls - Polar Electro VANTAGE M2 User Manual

Hide thumbs Also See for VANTAGE M2:

Table of Contents

SET PHONE NOTIFICATIONS ON

On your watch go to Settings > General settings > Phone notifications to set them on. Set phone notifications Off

or On, when not training. Note that you will not receive any notifications during training sessions.

In Flow app go to the Devices menu, choose your device and make sure Smart notifications/Phone notifications are

On.

After setting the notifications on sync your watch with the Flow app.

Please note that when phone notifications are set on the battery of your watch and phone will run out faster

because Bluetooth is continuously on.

If you want to disable notifications and call alerts for a certain period of time, set do not disturb on. When it is on, you will

not receive any notifications or call alerts during the time period you have set.

Choose Off, On or On (22.00 - 7.00), and the period when do not disturb is on. Choose when it Starts at and Ends at.

Whenever you receive a notification your watch will vibrate and a red dot will appear at the bottom left of the display.

View the notification by pressing BACK and choosing Notifications or by turning your wrist and looking at your watch.

When receiving a call your watch will vibrate and show the caller. You can also answer or decline the call with your watch.

Phone notifications may function differently depending on the model of your Android phone.

Control music and media playing on your phone with your watch during training sessions as well as from the Music

controls watch face when not training. Set the music controls on from Settings > General settings > Music

controls. You can control music from the training display, from the watch face, or both. Choose training display to

control music during your sessions and Watch face to access the controls when not training from the watch face.

Music controls are available for iOS and Android phones. To use the music controls you need to have the Flow app

running on your phone, and it also needs to be paired with your watch. For instructions, see

your

watch. The music controls setting becomes visible after pairing your watch with your phone via the Flow app. If you

did the setup for your watch via the Flow app your watch is already paired with your phone.

In time view, use the UP and DOWN buttons to navigate to the Music controls watch face.

Press the OK button to see the previous/next and pause/play buttons. Switch to the

previous or next song with the UP/DOWN buttons and pause with the OK button. Press

the LIGHT button to access the volume control.

Pairing a mobile device with

Table of Contents