Operator Control - Siemens SIRIUS 3RA6 System Manual

Accessories
7.14 Operator panel for 3RA64/3RA65 compact starter with IO-Link
7.14.3

Operator control

The operator panel can be used to scan the device statuses of up to 4 3RA64/3RA65
compact starters with IO-Link. In addition, the compact starters can be operated in manual
mode of the operator panel. For this purpose, the 4 compact starters must be connected to
each other and to an IO-Link master via a connecting cable (10-core, length 2 m for operator
panel).
You can find more information on the configuration of the compact starter groups in
"Installing the 3RA64/3RA65 compact starter with IO-Link (Page 129)".
Connection
The operator panel is connected to the last free interface for connecting cable (output) of a
compact starter group using the 10-core connecting cable for the operator panel.
Figure 7-18
NOTICE
Compact starter and operating panel material damage!
Inserting or removing the 10-core connecting cable under voltage results in momentary
failure of the internal bus connection of the compact starter 3RA64 / 3RA65.
Ensure that no auxiliary voltage is applied to the compact starter before inserting or
removing the connecting cable.
242
Connecting the operator panel
SIRIUS 3RA6 compact starter
System Manual, 08/2018, NEB560060102000/RS-AB/007