Procedure
The AS-i mounting module is addressed via an addressing socket, e.g. using the AS-
Interface addressing unit. The connecting cable is used to connect this unit to the addressing
socket.
Step
1
2
3
For more detailed information on the AS-Interface and on addressing of AS-i slaves, please
refer to the operating instructions "AS-Interface addressing unit V3.0" (3ZX1012-0RK10-
4BA1).
Note
The module address can be changed as often as required.
SIRIUS 3RA6 compact starter
System Manual, 08/2018, NEB560060102000/RS-AB/007
7.12 AS-i mounting module for 3RA61/3RA62 compact starter
Instructions
Disconnect the AS-i voltage.
Connect the AS-Interface addressing
unit to the addressing socket.
Set the required address.
Figure
Accessories
229