7.14.2
Installing
The operator panel is designed for use in the front panels of motor control centers, for
example, or in control cabinet doors.
Procedure
Step
1
2
3
4
Restricted functionality of the operator panel!
The IP54 seal and correct functional capability of the operator panel are not guaranteed if
the tightening torque of the supplied screws is too high.
Ensure the tightening torque of the supplied screws is not too high.
SIRIUS 3RA6 compact starter
System Manual, 08/2018, NEB560060102000/RS-AB/007
7.14 Operator panel for 3RA64/3RA65 compact starter with IO-Link
Instructions
Make a cutout in the front panel, for
example, or in the control cabinet door.
Insert the operator panel in the cutout.
Snap the four securing brackets onto the
operator panel.
Lock the operator panel in position by
tightening the four screws on the securing
brackets.
WARNING
Image
Accessories
241