Operator Control (Hardware); Simotion P State Application; Simotion P State Application Overview - Siemens SIMOTION Series Commissioning And Hardware Installation Manual

Operator Control (hardware)

8.1

SIMOTION P state application

8.1.1

SIMOTION P State application overview

The LEDs, mode selector, and CF card handling indicators, which are implemented as
hardware on other SIMOTION platforms, are visualized on the screen for SIMOTION P320-4.
The display is performed by the SIMOTION P State application. The following figures show
SIMOTION P State in the started state with/without inserted IsoPROFIBUS board.
Figure 8-1
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016
SIMOTION P State - PROFINET onboard
8
119