Installing The Compact Starter On An Infeed System For 3Ra6 - Siemens SIRIUS 3RA6 System Manual

3RA61/3RA62 compact starter
5.5 Installing/removal
5.5.1.3

Installing the compact starter on an infeed system for 3RA6

Requirements
● The SIRIUS infeed system for 3RA6 must be correctly installed. You can find additional
information on installing the infeed system in chapter "Infeed system for 3RA6
(Page 162)".
● The compact starter must be switched off (actuator set to
Procedure
①
②
③
④
⑤
68
NOTICE
Compact starter and infeed system material damage!
You can damage the compact starter and the infeed system if you insert the compact
starter into the infeed system for 3RA6 while the starter is switched on (actuator in the
READY position).
Make sure that the compact starter's actuator is set to the
insert the compact starter into the infeed system for 3RA6.
Ensure that the actuator is in the
Attach the compact starter to the front of the infeed system for 3RA6.
Push the compact starter straight onto the infeed system for 3RA6 until you hear it engage.
Release the actuator.
Remove the transport lock from the compact starter toward the front.
OFF position.
System Manual, 08/2018, NEB560060102000/RS-AB/007
OFF position).
OFF position before you
SIRIUS 3RA6 compact starter