Printronix ProLine 5 Series Manual page 45

ENTER – Selects the currently displayed option value as the active value. When
the display shows the desired configuration value, press and release to select
that value as the active value. An asterisk (*) appears next to the active value on
the display. ENTER also starts and stops printer tests and generates a
configuration printout. Press ENTER to start a printer test or configuration
printout. Press again to stop the printer test.
NOTE: The ENTER key must be unlocked in order to function.
UP or DOWN ( or
configuration menus and makes vertical forms adjustment. After pressing VIEW,
press or to adjust the paper up or down in 1/72 inch increments for fine
vertical forms alignment.
UP + DOWN ( +
NOTE: The ENTER key lock and unlock function can be configured to be
other than
PREV or NEXT (
configuration menu. In the configuration menu. press
press to scroll forward through the menu selections on the same level.
PREV + NEXT ( +
will reset to the power–up configuration and reset its internal state.
+ ON LINE (IPDS Emulation Only)
In offline mode, press
the printer will be placed in online mode, print one page, and return to the offline
mode. This action can be repeated until the end of a print job. Each time it prints
only one page. If no data are in the IPDS printer buffer, the printer will be placed
in online mode.
In the fault state,
3–6
Moves up and down between levels in the
) –
– Locks and unlocks the ENTER key.
)
+ (See page
or Moves between the options on the current level of
) –
When both keys are pressed simultaneously, the printer
)
+ ON LINE. If there is data in the IPDS printer buffer,
+ ON LINE does not work.
4–93).
to scroll backward or
Operating the Printer