Printronix ProLine 5 Series Manual page 98

Image Buf Size
IMAGE BUFFER SIZE (screen buffer size) allows you to select the following
image buffer sizes. This option is only valid when printer emulates 3287. For the
4234 emulation, the buffer size is fixed at 4k. A POR status is sent to the host
when the printer is made READY.
2K
4K
Intervention Req
Select from SEND TO HOST or DO NOT SEND. If SEND TO HOST is selected,
the printer sends a signal to the host computer when any of the following occur:
Printer faults occur.
Hold mode time-out occurs.
Translate Table
This parameter defines which translate table to use for printing. The following
options are available:
DEFAULT translates data by using the default table of the current
character set.
DOWNLOADED translates data from EBCDIC to internal code by using
the downloaded translate table.
Host Override
HOST OVERRIDE determines whether the printer accepts certain commands
sent by the host, or continues to use the current operator panel settings. The
following host commands are ignored when HOST OVERRIDE is enabled: line
length, forms length, lines per inch (LPI), characters per inch (CPI), print quality,
and text orientation (i.e. left to right). When HOST OVERRIDE is enabled, these
settings retain their operator panel settings.
Configuration Menus 4–45