Printronix ProLine 5 Series Manual page 75

CR Edit
This parameter determines if a carriage return will be followed by a line feed.
Disable. The printer ignores all carriage returns that are not followed by
line feeds.
Enable. The printer processes all carriage returns, even for those that
are not followed by line feeds.
Select Font
Select Font specifies which language is currently selected for use with the PGL.
Refer to page 4–26
Slash 0
This parameter allows you to print the numeral '0' with or without the slash. This
option applies to all character sets except OCR A and OCR B.
Disable. Zero is printed without a slash.
Enable. Zero is printed with a slash.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6–inch from the top of one print line to the top of the next print line.
Auto Uppercase
This parameter enables the printer to print text in all uppercase when using the
ALPHA command.
Disable. The printer will print text in upper and lowercase.
Enable. The printer will print text in uppercase only.
Skip Command Prefix
This parameter determines if a data string before a PGL command will be
ignored.
Disable. The printer will print any data before an IGP command.
Enable. The printer ignores all text before an IGP command.
4–22
for available selections.
Configuration Menus