Printronix ProLine 5 Series Manual page 219

Tear Position
Header
Pre–Printed
Print Position
Page 1
Header
Pre–Printed
Page 2
Tear Position
Print Position
Tear Position
Print Position
B–4
The form must have a preprinted header or
a header must be printed before the form is torn off. In either case,
the application must slew at least this distance prior to the paper
feed and tear off. The header must be no less than 2.66 inches.
2.66" minimum
Tear Position
Print Position
Press the VIEW/EJECT key and the
Header
printer slews the paper to position the
Pre–Printed
bottom of the last form printed at the tear
bar. Note: the printer knows what line it
First Line
is on and how far it must move.
Last Line
Page 1 The display indicates:
Header
Ready for tear
Pre–Printed
Eject to return
Slew
Page 2
Slew–Same distance
opposite direction.
Header
Pre–Printed
Press VIEW/EJECT again and
paper slews back the same
distance it slewed forward. The
display returns to its previous mes-
Page 2
sage.
Header
The form is printed along with paper
Pre–Printed
motion to skip the first print line below the
header region.
First Line
......
NOTE: It is possible to have the printer
Last Line
print the header information. The critical
point is that the paper stop below the header.
Page 1
Header
Pre–Printed
Page 2
Header
Pre–Printed
First Line
Last Line
Page 1
Tear Position
Header
Pre–Printed
Print Position
Page 2
Tear off form.
Demand Printing