Printronix ProLine 5 Series Manual page 114

Italic Print: This attribute specifies a slanted (either forward or
backward) text style.
Text position: Specifies where the text will positioned in the line space.
When set to Top of Line, text will be positioned at the top of the line
space. When set to Bottom of Line, the text will be positioned as if it
were at the bottom of a 6 lpi line space. The following example shows
both Top of Line and Bottom of Line text positions:
You can also specify if the zero character will print with a slash.
Page Format
Margins
The right margin is set in columns; column zero is defined as the far right
edge of the page, and column numbering increments from right to left.
The left margin is also set in columns; however, column zero is defined as the
far left edge of the page, and column numbering increments from left to right.
The bottom margin is defined in lines, starting from line zero at the
bottom of the page.
Perforation Skip
Perforation Skip allows or prevents printing on page perforation. When enabled, it
sets up a skip–over margin of 1/2", 2/3", 5/6", or 1". For example, a skip–over
margin of 1" allows a 1" margin at the bottom of the page perforation.
Configuration Menus 4–61