Install The Ribbon - Printronix ProLine 5 Series Manual

Install the Ribbon

1. Open the printer cover.
2. Raise the forms thickness lever as far as it will go.
3. Open the tractor doors.
Hub Latch
4. Squeeze the right hub latch and place the full spool on the right hub. Be sure
the ribbon feeds off the outside of the spool. Press the spool down until the
hub latch snaps into place.
Setting Up the Printer
Tractor
Door
Figure 2–2. Forms Thickness Lever
Forms
Thickness
Lever
Hammer Bank Cover
Ribbon Mask
Ribbon Guide
2–17