Printronix ProLine 5 Series Manual page 102

Auto Skip at End
AUTO SKIP AT END specifies whether or not to perform an automatic form feed
at the end of a print buffer. If form feed is the last character in the print order, the
form feed function is supplied by the AUTO SKIP AT END option.
OFF sets the printer to print at print position 1 of the next line.
ON sets the printer to print at print position 1 of the first line of the next
form.
FF After Job
This option determines the print position after an operator-initiated local copy
(print screen function).
OFF performs an automatic new line command after completing a print
buffer (unless a new line, form feed or carriage return command was
the last one executed). The printer is set to print at print position 1 of
the next line.
ON performs an automatic form feed command unless a form feed was
the last one executed. The printer is set to print at print position 1 of the
first line on the next form.
CR, EM, and NL (3287 only)
CR (Carriage Return), EM (Error Message), and NL (New Line) specify that the
printer treat the CR, EM, and NL control codes either as spaces or as control
codes.
OFF treats the CR, EM and NL commands as spaces.
ON treats the CR, EM and NL commands as control codes.
Configuration Menus 4–49