Ctp2000 Series Platform Overview; Introducing Ctp Platforms; Ctp2000 Series Processor - Juniper CTP2000 Series Hardware Documentation

CHAPTER 1

CTP2000 Series Platform Overview

Introducing CTP Platforms

CTP2000 Series Processor

Copyright © 2017, Juniper Networks, Inc.
Introducing CTP Platforms on page 3
CTP2000 Series Processor on page 3
CTP2008 Platform on page 4
CTP2024 Platform on page 5
CTP2056 Platform on page 7
Juniper Networks CTP Series Circuit to Packet platforms provide advanced technology
and features required to reliably transport legacy time-division multiplexing (TDM) and
other circuit-based applications across next-generation IP networks. CTP platforms
create an IP packet flow from a serial data or analog voice connection at one end and
provide the necessary processing to re-create the serial bit stream or analog signal from
the received packet flow at the other end.
CTP platforms provide compact and lightweight chassis, high port density, and multiple
Ethernet interfaces. Each CTP platform runs the CTP operating system (CTPOS) and
can be managed by the Juniper Networks CTPView Network Management System, a
secure, Web-based management tool for provisioning, managing, running diagnostics,
monitoring, and reporting on all CTP devices and circuits in the network.
Starting with CTPOS Release 6.6, Juniper Networks CTP2000 Series Circuit to Packet
platforms support the PP833 processors (see
PP310 and PP332 family of processors.
The front panel of the PP833 processor comprises the following components (see
Figure 1 on page 4):
PMC I/O—Both PMC slots are available to support compatible PMC I/O modules.
Ethernet connection—Provides the 1-Gbps Ethernet connection to the IP network by
means of a local Ethernet switch or router.
Console connection—Provides an asynchronous tty connection for locally configuring
the CTP Series device. Because of front panel space limitations, the PP833 processor
Figure 1 on page 4) in addition to the older
3