Equipment Rack Requirements; Ctp2000 Rack Requirements; Ctp2000 Mechanical Requirements - Juniper CTP2000 Series Hardware Documentation

CHAPTER 5

Equipment Rack Requirements

CTP2000 Rack Requirements

Related
Documentation

CTP2000 Mechanical Requirements

Copyright © 2017, Juniper Networks, Inc.
CTP2000 Rack Requirements on page 39
CTP2000 Mechanical Requirements on page 39
CTP2000 Space Requirements on page 40
CTP2000 Rack Installation on page 40
CTP Cabling Recommendations on page 40
When allocating equipment rack space, consider the following:
Type of equipment racks recommended for the system
Number of equipment racks required to hold your current system configuration
Future expansion
Make sure that your distribution rack meets basic mechanical and space requirements
and complies with conventional standards. In the United States, use EIA-310-D Cabinets,
Racks, Panels, and Associated Equipment, September 1992.
CTP2000 Mechanical Requirements on page 39
CTP2000 Space Requirements on page 40
CTP2000 Rack Installation on page 40
Follow these mechanical requirements for your rack:
Select from the following rack options:
Two-post rack—a freestanding enclosed cabinet with two mounting posts in the
front
Telco-type rack—two adjacent mounting posts that you must secure to the floor or
an overhead structure
39