Ctp2056 Platform; Figure 6: Ctp2024 Platform Containing The Pp332 Processor; Figure 7: Ctp2024 Platform Containing The Pp332 Processor; Interface - Juniper CTP2000 Series Hardware Documentation

Related
Documentation

CTP2056 Platform

Copyright © 2017, Juniper Networks, Inc.
Figure 6: CTP2024 Platform Containing the PP332 Processor (AC Version,
Rear View)
Figure 7: CTP2024 Platform Containing the PP332 Processor (DC Version,
Rear View)
Ground terminal
Not used
PMC I/O 2
Fuse
Power A and power B input connectors
CTP2008 Platform on page 4
CTP2056 Platform on page 7
The Juniper Networks CTP2056 Circuit to Packet platform can have up to seven removable
interface modules and one removable processor module, and is available in both
AC-powered and DC-powered versions. It has a removable fan tray, and airflow is
side-to-side. Figure 8 on page
the CTP2056 chassis containing the PP332 processor (which requires an RTM card for
Ethernet and console port accesses). The new PP833 processor module does not require
an RTM card. All PP833 module access is located on the front panel with all CTP serial
and T1/E1 ports. If you are upgrading from the old PP310 or PP332 processor to the PP833
processor, the RTM card may be left in the node. But, none of the interfaces (Ethernet
or serial ports) on the RTM panel are functional.
Chapter 1: CTP2000 Series Platform Overview
Console ETH1 USB
Not used ETH0
COM2 COM3
Interface module, slot 1
Interface module, slot 2
8, Figure 9 on page 9, and
Not used
PMC I/O 1
Figure 10 on page 10 show
7