CHAPTER 15
Cabling
Cabling the CTP2000 Platform Overview
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Cabling the CTP2000 Platform Overview on page 101
Cabling the CTP platform requires the following main tasks:
Familiarize yourself with the module ports, and ensure that you have the cables and
1.
wires needed to complete each cabling procedure.
Read and understand all safety warnings. (See
2.
on page
67.)
Connect timing ports.
3.
4.
Connect the power cables from the power source to the power supply.
5.
Connect the interface modules to their appropriate network interface.
6.
For more information about CTP2000 Series cable and pinout specifications, refer Cable
CTP Cabling Recommendations on page 40
Required Tools, Wires, and Cables for the CTP2000 Platform on page 102
Cabling the CTP Platform for DC Power on page 103
Setting Up Management Access on the CTP2000 Platform on page 111
CTP2000 Console Port Setup on page 112
"CTP Safety Guidelines and Warnings"
101