Juniper CTP2000 Series Hardware Documentation page 138

CTP2000 Hardware Documentation
Related
Documentation
122
Select 1) remove. You are prompted to enter a slot number.
4.
Enter 1. The following message is displayed:
5.
system!
Remove the interface module from the slot.
6.
Plug the new or replacement interface module into the slot.
7.
Press Enter.
8.
Select 8) Card Swap menu.
9.
Select 2) add. You are prompted to enter a slot number.
10.
Enter a slot number from 1 to 6. The following message is displayed:
11.
the card is already physically inserted.
Press Enter. The following message is displayed:
12.
populated to the card!
Quit the current menu session before resuming work by opening a new menu session.
13.
CTP2000 Serial Interface Modules on page 11
CTP2000 T1/E1 Interface Module on page 12
It is now safe to remove the card from the
Please make sure
Card is inserted and the database is
Copyright © 2017, Juniper Networks, Inc.