5-2-10 Lever Ratio (
When using a lever for measurement, you can output the measured value multiplied by the le-
ver ratio as the judgment value (JUDGE.V)
Setting method
Long-press for 2 seconds
Setting item
Lever ratio (LEVER)
<Reference>
If the lever ratio is set to a value outside the range, "
MAIN (white).
You will then return to the lever ratio setting screen. Set a valid value for the lever ratio.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
)
When lever ratio is 10
Measured value
x10
CALC: Only appears on master unit
0.1 to 100.0 (times)
FUNCTION SETTINGS
Display value
Setting range
" will appear in the digital display /
: Move through
digits
: Change value
Finalize
Default value
1.0
5-23