Input All ( ) (Master Unit Only) - Panasonic HG-S Series User Manual

5-3-2 Input All (
You can enable ALL IN on the master unit to input trigger input, preset input, and other signals
into all connected slave units.
Input All
Single (ONE)
All (ALL)
<Reference>
Input All can only be set on a master unit to which slave units are connected.
© Panasonic Industrial Devices SUNX Co., Ltd. 2019
) (Master Unit Only)
Perform master and slave unit external input individually.
External signals are input into each slave unit according to the external input setting.
When a signal is input into the master unit, the same signal is input into all connected slave
units.
The same signals are input into the slave units as the master unit, regardless of the external
input setting.
ONE (single)
Slave
unit
Function
Slave Slave Slave Master
unit unit unit unit
FUNCTION SETTINGS
ALL (all)
5-53